(240) 603-0727 [email protected]

      So, construction is finally done on your project?

      That’s fantastic. Hopefully, it went very well and came in under budget.

      However, just because construction is done doesn’t mean that the job is over. Once construction is over with, it’s time for post-construction cleaning.

      Post-construction cleaning is absolutely critical for making sure that the building is safe, clean, and ready for tenants.

      Post-construction cleanups can be tricky. We made a post-construction cleaning checklist that explains everything you need to do to complete a post-construction cleanup job right.

      Here is a post construction cleaning checklist with the top 25 items you must complete:

      Post Construction Cleaning Tips

      1. Vacuum all carpets

      In order to make your carpet floors look their best, you need to vacuum them thoroughly. Vacuuming carpets will remove any leftover debris from the construction job that landed on the floor.

      2. Dispose of all trash

      It is common for there to be leftover trash at construction sites. This could be old coffee cups, paint trays, plastic bags, construction debris, etc. All this will have to be removed and disposed of in the proper ways.

      3. Sponge countertops

      Oftentimes, during construction projects, countertops will build up a layer of dust and grime. In order to get them sparkling again, you should take a damp sponge and run it over the entire surface of the countertop.

      4. Mop hard floors

      Just as carpeted floors need to be vacuumed, hard floors such as wood, tile, and bamboo should be mopped thoroughly.

      5. Clean the windows

      You can do this with a product such as Windex and a paper towel. There are also organic window cleaning products available if you prefer natural options.

      You want to clean the windows to the point where no handprints or streaks are visible on them. No post-construction cleaning checklist is complete without cleaning the windows.

      6. Wipe the mirrors

      If a mirror is dirty, it gets noticed very quickly. This is because people look in them so frequently. So, make sure you wipe down the mirrors to eliminate any streaks or dirty spots.

      7. Clean the windowsills

      Like countertops, windowsills are an area where a lot of dust and debris can accumulate. You will need to dust these and wipe them down in order to properly remove all of the debris that can be found on them. Once you do this, they will look much better.

      8. Dust the ceilings and ceiling fans

      Your building will not reach its maximum level of beauty and cleanliness unless the ceilings and ceiling fans are dusted. Large amounts of dust tends to accumulate on ceiling fans, so pay special attention to this area.

      9. Clean exterior lights

      In addition to getting dirty as the result of being outside and exposed to the elements, exterior lights can build up dust and grime during construction projects. So, do not forget to clean these during your post-construction cleanup.

      10. Remove paint from hinges

      Sometimes, during the construction process, paint can get onto hinges. This is because the painter accidentally touches his or her paintbrush to the hinge. Usually, this paint is not cleaned off during the painting process, and sometimes it is forgotten.

      So, make sure that you check all hinges to make sure there is not paint. If there is, then clean it off.

      11. Dust all handrails and banisters

      This includes both the top part and the poles that support the top part. Both areas have to be cleaned thoroughly in order to make the handrails and bannisters look their best. These are very important to clean considering the fact that they are often a key part of the beauty of the room.

      12. Clean the toilets

      This is not necessarily the most fun part of the post-construction cleaning checklist. However, it still has to be done. Clean toilets are important not only from an aesthetic point of view but also from a hygienic point of view.

      Make sure you do not skimp on this cleaning job. It is very important.

      13. Remove all packaging, tape, plastic, etc.

      Oftentimes, during construction projects, there is a lot of leftover plastic, tape, packaging, and other materials that are left over when the job is done. These materials come from new appliances, painters marking boundaries, new furniture, and other things.

      Unfortunately, if these materials are left on the ground it creates a big mess. So, make sure that you track down every last piece of tape, plastic, and packaging and throw it away.

      14. Clean and dust the tops and sides of doors

      When a door is properly cleaned and dusted, it can look very beautiful and can help to improve the overall look of the room.

      So, make sure that cross this item off of your post-construction cleaning checklist by not neglecting the doors and giving them the proper cleaning attention
      that they need. This is especially true if the doors are white.

      15. Power wash the deck, driveway, and porch.

      If you power wash the deck driveway, and porch, you can remove a layer of grime and dirt that you might not have even realized was there. You will be amazed at how much better your deck, driveway, and porch look after they are power washed. If you do not have a power washer, you can rent one to get the job done.

      16. Clean cabinets

      When you are cleaning the kitchen, make sure that you take the time to wipe down the cabinets and remove any stains or debris that might have accumulated on them.

      Cabinets help to add beauty to kitchens, so make sure that you clean your cabinets thoroughly so that they can shine and make your kitchen look great.

      17. Dust grates and vents

      Unfortunately, grates and vents are often not added to post-construction cleaning checklists.This means that you need to pay special attention to them and to give them a good dusting. Without clean grates and vents, your rooms will never be completely clean. So a great post-construction cleaning tip is to make sure that you don’t forget them.

      18. Clean the inside of closets

      Sometimes, during construction projects, workers will store trash, tools, or materials inside of closets. Occasionally, these items get forgotten about. So, make sure that you go through the closets and remove any materials that shouldn’t be there.

      You should also dust the inside of the closets and just give them a general cleaning. This will impress future tenants.

      19. Wipe down the interior masonry

      This is an essential item on your post-construction cleaning checklist. Interior masonry includes brick, rock, and marble.

      These types of surfaces often get a lot of dust and other types of particles on them. Make sure that you wipe them down thoroughly so that they are fully cleaned and not dirty.

      20. Pick up any trash or debris on the lawn or surrounding grounds

      Occasionally, construction workers leave trash and debris outside of the home. This material can be left behind after the workers leave the job. You should walk around the outside of the building and check to see if any trash has been left behind. If it has, picks it up and throw it away.

      21. Clean all appliances

      This includes stoves, refrigerators, microwaves, coffee pots, toasters, and more. Except for the fridge, make sure that all appliances are turned off when you are cleaning them.

      The last thing you want when you are completing your post-construction cleaning checklist is to get injured
      because you accidentally touched a hot stove.

      22. Wipe down tables and chairs.

      If any tables and chairs have been put into the building following construction, then you should make sure to wipe them all down and get rid of any dust or debris that may have accumulated on them.

      23. Add a welcome mat

      Adding a welcome mat to the front entrance of the building pr apartment not only adds character to the building, but it gives people a place to wipe their shoes when they enter the space.

      This can help to reduce the amount of dirt that reaches the floors and can reduce the amount of time you have to spend cleaning the floors in the future.

      24. Diffuse essential oils into the air.

      Essential oils such as eucalyptus will not only help purify the air, but they can also make the space smell exceptionally good. Further, they can help to get rid of new paint smells or any other construction smells that are lingering on.

      25. Empty all trash cans and recycling bins

      During construction projects, trash cans and recycling bins often get full from workers throwing away materials and trash in them. To complete your post-construction checklist, you need to make sure that you empty all of the trash cans and recycling bins that are on the site.

      Only then will the building or apartment be entirely clean.

      Conclusion of our post-construction cleaning checklist

      If you’ve been searching for post-construction cleaning tips or post-renovation cleaning tips, then this checklist is exactly what you need.

      After reading this post-construction cleaning checklist, you should now have all of the information that you need to clean the site in an optimal way.

      However, you can also hire a Northern Virginia cleaning company to assist you with this process.

      If you are interested in hiring us to help you with your post-construction cleanup, in Northern Virginia, you can book our service online or call us today at (240) 603-0727